Moz Q&A is closed.
After more than 13 years, and tens of thousands of questions, Moz Q&A closed on 12th December 2024. Whilst we’re not completely removing the content - many posts will still be possible to view - we have locked both new posts and new replies. More details here.
Forwarded vanity domains, suddenly resolving to 404 with appended URL's ending in random 5 characters
-
We have several vanity domains that forward to various pages on our primary domain.
e.g. www.vanity.com (301)--> www.mydomain.com/sub-page (200)These forwards have been in place for months or even years and have worked fine. As of yesterday, we have seen the following problem. We have made no changes in the forwarding settings.
Now, inconsistently, they sometimes resolve and sometimes they do not. When we load the vanity URL with Chrome Dev Tools (Network Pane) open, it shows the following redirect chains, where xxxxx represents a random 5 character string of lower and upper case letters. (e.g. VGuTD)
EXAMPLE:
www.vanity.com (302, Found) -->
www.vanity.com/xxxxx (302, Found) -->
www.vanity.com/xxxxx (302, Found) -->
www.vanity.com/xxxxx/xxxxx (302, Found) -->
www.mydomain.com/sub-page/xxxxx (404, Not Found)This is just one example, the amount of redirects, vary wildly. Sometimes there is only 1 redirect, sometimes there are as many as 5.
Sometimes the request will ultimately resolve on the correct mydomain.com/sub-page, but usually it does not (as in the example above).
We have cross-checked across every browser, device, private/non-private, cookies cleared, on and off of our network etc... This leads us to believe that it is not at the device or host level.
Our Registrar is Godaddy. They have not encountered this issue before, and have no idea what this 5 character string is from. I tend to believe them because per our analytics, we have determined that this problem only started yesterday.
Our primary question is, has anybody else encountered this problem either in the last couple days, or at any time in the past? We have come up with a solution that works to alleviate the problem, but to implement it across hundreds of vanity domains will take us an inordinate amount of time. Really hoping to fix the cause of the problem instead of just treating the symptom.
-
Yes, we have contacted GoDaddy several times.
GoDaddy has insisted it is not their problem and they do not have any advice to resolve this issue. GoDaddy support said there can be strange behavior when forward and masking. We tested removing the masking, but it did not make a difference. Nor does 301 vs. 302 redirecting. I understand the latter should not be used as a workaround as these responses have different meanings, but we did test (which also made no difference).
Check this link for more details:
Others are experiencing the same issue and somewhere in the thread it was stated that GoDaddy recently rolled out a new system which likely created this issue. We can trace the issue beginning in late August 2017 via Google Analytics, Search Console 404s and testing via Chrome Dev Tools (Network pane with Preserve log checked).
We would also like to understand why in order to address the root cause, instead of using a workaround. This is significant issue. Unfortunately, GoDaddy is not handling the issue professionally and will impact our future business decisions involving GoDaddy.
-
That's a very strange behavior I have not seen before (and I've had plenty of experience with GoDaddy and their domain forwarding).
The query workaround is interesting/clever - but I'd also be inclined to want to sort out why this is happening at all and stop it vs reworking all the domain forwards around this symptom.
Have you contacted GoDaddy's shared hosting support? I'm not the biggest GoDaddy fan overall, but their tech support team can be quite helpful in tracking issues like this down.
-
It looks like this is a GoDaddy specific issue that many others are experiencing:
Although, at the time of this writing GoDaddy has not offered an explanation nor resolution. However, a workaround may be forwarding the domain with a query string appended, which in turn, appends the random six characters to the query string, instead of creating a url segment that the CMS interprets as a non-existent page and throws a 404.
For example, consider:
www.vanity.com -> www.primary.com?utm_source=forward
The GoDaddy issue should then resolve with via:
www.primary.com?utm_source=forwardxxxxxx
Alternatively, the fowarding can be accomplished from the reverse angle, if you have access to the hosting account of the primary domain by adding a forwarded domain from something like cPanel or Plesk that points the primary domain name and then updating the GoDaddy A record to point to the primary domain's IP Address (and remove any GoDaddy forwarding).
Or migrate from GoDaddy!
Got a burning SEO question?
Subscribe to Moz Pro to gain full access to Q&A, answer questions, and ask your own.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How does educational organization schema interact with Google's knowledge graph?
Hi there! I was just wondering if the granular options of the Organization schema, like Educational Organization (http://schema.org/EducationalOrganization) and CollegeOrUniversity (http://schema.org/CollegeOrUniversity) schema work the same when it comes to pulling data into the knowledge graph. I've typically always used the Organization schema for customers but was wondering if there are any drawbacks for going deep into the hierarchy of schema. Cheers 😄
Intermediate & Advanced SEO | | Corbec8880 -
Need a layman's definition/analogy of the difference between schema and structured data
I'm currently writing a blog post about schema. However I want to set the record straight that schema is not exactly the same as structured data, although both are often used interchangeably. I understand this schema.org is a vocabulary of global identifiers for properties and things. Structured data is what Google officially stated as "a standard way to annotate your content so machines can understand it..." Does anybody know of a good analogy to compare the two? Thanks!
Intermediate & Advanced SEO | | RosemaryB0 -
Partial Match or RegEx in Search Console's URL Parameters Tool?
So I currently have approximately 1000 of these URLs indexed, when I only want roughly 100 of them. Let's say the URL is www.example.com/page.php?par1=ABC123=&par2=DEF456=&par3=GHI789= All the indexed URLs follow that same kinda format, but I only want to index the URLs that have a par1 of ABC (but that could be ABC123 or ABC456 or whatever). Using URL Parameters tool in Search Console, I can ask Googlebot to only crawl URLs with a specific value. But is there any way to get a partial match, using regex maybe? Am I wasting my time with Search Console, and should I just disallow any page.php without par1=ABC in robots.txt?
Intermediate & Advanced SEO | | Ria_0 -
What's the best possible URL structure for a local search engine?
Hi Mozzers, I'm working at AskMe.com which is a local search engine in India i.e if you're standing somewhere & looking for the pizza joints nearby, we pick your current location and share the list of pizza outlets nearby along with ratings, reviews etc. about these outlets. Right now, our URL structure looks like www.askme.com/delhi/pizza-outlets for the city specific category pages (here, "Delhi" is the city name and "Pizza Outlets" is the category) and www.askme.com/delhi/pizza-outlets/in/saket for a category page in a particular area (here "Saket") in a city. The URL looks a little different if you're searching for something which is not a category (or not mapped to a category, in which case we 301 redirect you to the category page), it looks like www.askme.com/delhi/search/pizza-huts/in/saket if you're searching for pizza huts in Saket, Delhi as "pizza huts" is neither a category nor its mapped to any category. We're also dealing in ads & deals along with our very own e-commerce brand AskMeBazaar.com to make the better user experience and one stop shop for our customers. Now, we're working on URL restructure project and my question to you all SEO rockstars is, what can be the best possible URL structure we can have? Assume, we have kick-ass developers who can manage any given URL structure at backend.
Intermediate & Advanced SEO | | _nitman0 -
Creating 100,000's of pages, good or bad idea
Hi Folks, Over the last 10 months we have focused on quality pages but have been frustrated with competition websites out ranking us because they have bigger sites. Should we focus on the long tail again? One option for us is to take every town across the UK and create pages using our activities. e.g. Stirling
Intermediate & Advanced SEO | | PottyScotty
Stirling paintball
Stirling Go Karting
Stirling Clay shooting We are not going to link to these pages directly from our main menus but from the site map. These pages would then show activities that were in a 50 mile radius of the towns. At the moment we have have focused our efforts on Regions, e.g. Paintball Scotland, Paintball Yorkshire focusing all the internal link juice to these regional pages, but we don't rank high for towns that the activity sites are close to. With 45,000 towns and 250 activities we could create over a million pages which seems very excessive! Would creating 500,000 of these types of pages damage our site? This is my main worry, or would it make our site rank even higher for the tougher keywords and also get lots of traffic from the long tail like we used to get. Is there a limit to how big a site should be? edit0 -
Include Cross Domain Canonical URL's in Sitemap - Yes or No?
I have several sites that have cross domain canonical tags setup on similar pages. I am unsure if these pages that are canonicalized to a different domain should be included in the sitemap. My first thought is no, because I should only include pages in the sitemap that I want indexed. On the other hand, if I include ALL pages on my site in the sitemap, once Google gets to a page that has a cross domain canonical tag, I'm assuming it will just note that and determine if the canonicalized page is the better version. I have yet to see any errors in GWT about this. I have seen errors where I included a 301 redirect in my sitemap file. I suspect its ok, but to me, it seems that Google would rather not find these URL's in a sitemap, have to crawl them time and time again to determine if they are the best page, even though I'm indicating that this page has a similar page that I'd rather have indexed.
Intermediate & Advanced SEO | | WEB-IRS0 -
Posing QU's on Google Variables "aclk", "gclid" "cd", "/aclk" "/search", "/url" etc
I've been doing a bit of stats research prompted by read the recent ranking blog http://www.seomoz.org/blog/gettings-rankings-into-ga-using-custom-variables There are a few things that have come up in my research that I'd like to clear up. The below analysis has been done on my "conversions". 1/. What does "/aclk" mean in the Referrer URL? I have noticed a strong correlation between this and "gclid" in the landing page variable. Does it mean "ad click" ?? Although they seem to "closely" correlate they don't exactly, so when I have /aclk in the referrer Url MOSTLY I have gclid in the landing page URL. BUT not always, and the same applies vice versa. It's pretty vital that I know what is the best way to monitor adwords PPC, so what is the best variable to go on? - Currently I am using "gclid", but I have about 25% extra referral URL's with /aclk in that dont have "gclid" in - so am I underestimating my number of PPC conversions? 2/. The use of the variable "cd" is great, but it is not always present. I have noticed that 99% of my google "Referrer URL's" either start with:
Intermediate & Advanced SEO | | James77
/aclk - No cd value
/search - No cd value
/url - Always contains the cd variable. What do I make of this?? Thanks for the help in advance!0 -
Tool to calculate the number of pages in Google's index?
When working with a very large site, are there any tools that will help you calculate the number of links in the Google index? I know you can use site:www.domain.com to see all the links indexed for a particular url. But what if you want to see the number of pages indexed for 100 different subdirectories (i.e. www.domain.com/a, www.domain.com/b)? is there a tool to help automate the process of finding the number of pages from each subdirectory in Google's index?
Intermediate & Advanced SEO | | nicole.healthline0